Reducers

Apolo SR04 <100 kW and <130kW






   
Dimensions
120x125x105 mm
Material 1.5 kg
Weight
Aluminium die cast body
Max. inlet pressure
3 MPa
Outlet pressure
variable from 90 to 180 kPa *
Solenoid voltage
12 V DC
Solenoid absorption
17 W
Inlet connection
M10x1 pipe ø6 mm
Outlet connection
Fixed fitting ø12 mm
Engine power From 100 to 130 kW
   

The SR04 reducer is maded for LPG sequential injection systems.

It's Equipped with filter unit and inlet solenoid valve, compared to basic version it has also an additional post-heating of theLPG at the outlet, that allows higher gas flow and higher gas temperature at the exit.

Apolo /1 is suitable for engines with power from 60 kW to 100 kW.

The pressure at the outlet is adjustable from 0,9 to 1,8 bar.
This version of LPG reducer is a single stage reducer for LPG sequential injection systems, homologated 67R-01.

Equipped with filter unit and inlet solenoid valve, compared to basic version it has also an additional post-heating of the lpg at the outlet, that allows higher gas flow and higher gas temperature at the exit.

Apolo SRO4/2 version is suitable for engines with power from 100kW to 130kW and with temperature not lower than -10 °C.
With lower temperatures the reducer could not be sufficient to follow the maximum power requirement from the engine.

The pressure at the outlet is adjustable from 0,9 to 1,8 bar
(pressures referred to reducer not connected to the engine).